Drum machines and samplers
The sound of a hip hop record depends heavily on the machine it was made with. Each generation of affordable equipment had its own limits, such as a few seconds of memory, a coarse sampling rate or a fixed set of drum sounds, and producers turned those limits into styles. This guide goes through the main instruments in order, from the drum machines of the early 1980s through the classic samplers to the software that replaced them.
The first beat boxes: TR-808, DMX and LinnDrum
The Roland TR-808, sold from 1980 to 1983, generated its sounds with analog circuits and did not sound much like a drum kit. It failed commercially and became cheap secondhand, which is how it reached hip hop. Its long, booming bass drum, sharp snare, handclap and cowbell are the basis of "Planet Rock" in 1982 and of electro, Miami bass and, decades later, trap, where the sustained 808 kick doubles as the bass line. Few instruments have had so long a life in the genre.
The Oberheim DMX and the LinnDrum, both introduced in the early 1980s, took a different route: they played back short digital recordings of real drums stored on chips. The DMX gave the first singles by Run-DMC in 1983 their hard, dry punch, and it is the machine behind much of the new school of 1984 to 1986; the producer Davy DMX took his name from it. These machines were programmed in steps, so their rhythms were exact and repetitive, and a human feel had to be suggested with accents and with scratching on top.
The SP-1200 and its 12-bit sound
E-mu's SP-12 of 1985 added the ability to record the user's own sounds, and its successor, the SP-1200 of 1987, was the central instrument of East Coast production for a decade. It sampled at 12-bit resolution and a low sampling rate and held about 10 seconds of sound in total, divided among its pads. Those figures were limits, and they were also a sound: drums came out gritty and thick, and high frequencies took on a ringing edge that many producers came to prefer to cleaner machines.
The memory limit shaped technique. Producers sampled records played at 45 instead of 33 revolutions per minute and tuned them back down inside the machine to save time, which roughened the sound further, and they cut phrases into short pieces because long ones would not fit. Ced Gee of Ultramagnetic MC's, the Bomb Squad, Pete Rock and Large Professor all built records on it, usually alongside an Akai S950 rack sampler, which offered more sampling time and a filter that could isolate a bass line from a busy record.
The MPC
The Akai MPC60, released in 1988, was designed by Roger Linn, who had built the LinnDrum. It put a sampler, a sequencer and 16 rubber pads in one box, so that a producer could tap in a rhythm by hand, and its timing controls included a swing setting that delayed alternate notes by adjustable amounts. The MPC line continued through the MPC3000 of 1994 and the cheaper MPC2000 of 1997, with more memory and cleaner sound at each step, and became the standard tool of boom bap production.
Because the pads responded to touch, the MPC rewarded playing over programming. DJ Premier used an MPC60 with an S950 for the chopped style of the Gang Starr records, and Dr. Dre sequenced many of his West Coast productions on an MPC3000. J Dilla turned off the machine's timing correction and played drum parts freehand, slightly early or late, producing a loose, human pulse that drummers later learned to imitate. His MPC3000 is now in the collection of the Smithsonian's National Museum of African American History and Culture.
Sampling keyboards and the move to the computer
Not every producer worked from pads. The Ensoniq ASR-10, a sampling keyboard released in 1992, and the earlier EPS let a sample be spread across the keys and played at any pitch, and included built-in effects. RZA made the early Wu-Tang Clan records largely on Ensoniq machines, which accounts for their detuned, pitched-down piano and string phrases. Timbaland used the ASR-10 for the stuttering drum programming of the late 1990s, and Kanye West made his early soul-sample productions on one.
By the late 1990s the workstation keyboard, with hundreds of preset sounds, had joined the sampler in most studios. Southern producers in particular built tracks from programmed 808 drums and synthesized strings, brass and bells with no samples at all, a method that avoided clearance costs and gave crunk and early trap their bright, hard finish. Multitrack recording was moving at the same time from tape to the computer. Pro Tools, introduced in 1991, was the standard studio recorder by about 2000, and editing a vocal on screen became routine.
Software: FL Studio and the laptop studio
Fruity Loops, a Belgian program first released in the late 1990s and renamed FL Studio in 2003, did the most to change who could make a beat. It ran on an ordinary home computer, its step sequencer made programming drums a matter of clicking boxes, and copies circulated freely among teenagers. 9th Wonder used it for sample-based work in the early 2000s, Soulja Boy made "Crank That" with it in 2007, and the trap producers who followed, among them Lex Luger and Metro Boomin, built its rapid hi-hat rolls and sliding 808 notes into the sound of the 2010s.
A digital audio workstation such as FL Studio, Ableton Live, released in 2001, or Logic now does everything the hardware did, without limits on memory or track count. Sounds come from downloadable drum kits and loop libraries, a finished beat can be emailed to a rapper or posted for sale as a type beat, and the credits of one track often list several producers who never met. The older machines have not vanished. The SP-1200 was reissued in 2021, Akai still makes MPCs, and some producers choose them for a grain that software only imitates.